Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 678 828 9868
Cell: +1 404 202 9655com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
Our accumulators are easily adapted to your production needs. The accumulation capacity and change over speed are adjusted to correspond to the line performance to maximize your productivity.
Our Accumulator MHE SBS 800 has a horizontal beam on which the carriage moves. A set of (moving) wheels are fixed to the carriage. The "fixed" set of wheels with a pneumatic cylinder can move about 400 mm along the beam, and work as a dancer to keep the cable tension low. The cable loops between the two sets of wheels are supported by horizontal cable supports. The machine is equipped with a Unidrive AC drive only. The whole control system is built inside the drive.
The carriage is pulled by a chain from an AC motor which is controlled by a frequency converter to give constant torque, which results in approximately constant cable tension. Cable tension can be adjusted from a control panel which can be freely mounted for easy operation.
The accumulator is automated, and the carriage can be jogged when threading the cable. The accumulator uses either composite, aluminium or coated aluminium wheels which allow low tension in addition to great mechanical strength.
|Cable diameter, max.||30 mm|
|Pulling force in the carriage, max.||15 000 N|
Exact values depend on the assembly.
A perfect crosshead solution for single and dual layer extrusion of LV and MV rubber cables. The conical design allows improved contact between parts with improved centering, sealing and heat transmission. Conical parts are also easier to assemble and dismantle. Read more
Maillefer has a coiler or reeler model for your specific pipe & tube application. While they compose a familiar item in our typical extrusion line portfolio, they are also quite popular as individual components for upgrades of existing lines. Every model is fully automated, dual position, stand-alone, user-friendly and built with safety in mind. Read more
Bring your child to work day at Maillefer was greeted with great enthusiasm, sincere interest in high technology and a lot of giggling and laughing. Read more
Sustainable solutions are not an option anymore, but rather a must. As climate reports repeatedly sound the warning bell, the priority to develop and apply sustainable technology solutions becomes more central in all business models. Today, technology plays a big role in sustainable development in all regards, whether they be social, environmental, or economical. Technologies enable several key aspects, including resource conservation, reuse and recycling, energy efficiency, minimal environmental impact and pollution reduction. Read more
Maillefer has a complete program of extrusion heads which fulfils the needs for pipe & tube manufacturing. Typically proposed in our line offerings, as well as for performance upgrades and component replacements. The TL and ELH longitudinal heads, and the VLCH and ECH crossheads form the four families that cover pipe & tube applications. They respond to a variety of design requirements like single layer or multi-layer, stripe or skin options, co-extrusion or tandem processes, countless adhesives, polymers and elastomers, and special connections and tooling configurations. Read more
The 100th multi-layer PAL line is going to Chinaust and in particular to their facilities in Changchun in northeast China. Factory Acceptance Tests took place during the last days of June 2019 in the presence of a four person delegation led by Li Hongjie, General Manager of Changchun Chinaust. Not only was it the occasion to mark a successful acceptance by the customer, but also to highlight the delivery of the 100th multi-layer automotive tube extrusion line. Indeed, representatives from both companies began plans for celebrating Chinese style once the line ready for production. Read more
Maillefer really enjoyed hosting the stand at K 2019 together with team members from Davis-Standard. The visitors and exchanges were just fantastic! Read more
Maillefer has a complete program of crossheads which fulfils the variety of needs in wire & cable manufacturing. Often included in our line configurations, they are also in demand for performance upgrades and component replacements. The THX and ECH models form the two large families of extrusion heads that respond to a variety of applications. Read more