Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 678 828 9868
Cell: +1 404 202 9655com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
Always run at constant production speed, without interruption or ramping during reel transfers. Cut off and reel loading / unloading are done automatically and safely.
This automatic type reeler is designed to wind micro-duct or automotive pipe onto plastic reels. An accumulator dancer assures smooth and reliable transfers. The reels are unloaded safely from the back side of the machine, assisted by a reel lift. The unloading door is opened by the operator while protecting him from the winding side of the machine.
Both versions for each line direction are available.
|Tube diameter range||3.5 to 16 mm|
|Max. flange diameter||1000 mm|
|Linear speed range||25 to 200 m/min or 60 to 300 m/min|
Exact values depend on the assembly.
R&D partnering, performance excellence throughout equipment life-cycles, and sustainable practices help nurture long lasting partnerships. Come explore the innovations and collaboration possibilities. Read more
World events increase demand for multi-layer pipe around the globe. Maillefer provides you with the experience, the right resources, and the support to realize manufacturing excellence. Read more
Stop by and meet with Maillefer at any of the industry events during 2023. We invite you to arrange your meeting with us before the show takes place. Read more
The new generation multi-layer crosshead for co-extruding today’s EVOH, PE-RT and PEX materials has arrived. Its nested distributor design results in perfect layer concentricity. Read more
Check out this new addition to our existing floor traversing take-up and pay-off family. It answers the demand for heavy cable carrying capacity of up to 100 tons. Read more
Here is a perfect solution for dual-layer extrusion of rubber cables. Aim for higher speeds while avoiding premature crosslinking thanks to the DHC crosshead. Read more
Nexans’ high-voltage cable plant underwent a significant expansion to become the first plant in the USA producing for offshore wind farms. Cable roundness goes a long way to help achieve excellence. Read more
There are several thousand of Maillefer extrusion lines and components currently producing for a large range of applications. Some may be yours. Turn to us to help keep them running at optimum levels. Read more