Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
Always run at constant production speed, without interruption or ramping during reel transfers. Cut off and reel loading / unloading are done automatically and safely.
This automatic type reeler is designed to wind flat irrigation laterals onto cardboard reels. An accumulator dancer assures smooth and reliable transfers. The reels are unloaded safely from the front side of the machine at a convenient height for the operator. The unloading door is opened by the operator while protecting him from the winding side of the machine.
A second version of the reeler is available with back side access and ramp assist. Plus there are two versions for each line direction.
|Tube diameter range||12 to 25 mm|
|Max. flange diameter||600 mm|
|Linear speed||up to 300 m/min|
Exact values depend on the assembly.
A Cable Technology Package (CTP) is developed especially for High & Extra High Voltage Subsea Cable (AC) Flexible Vulcanized Joints (FVJ). The CTP was presented at the wire 2018 exhibition. Read more
Maillefer continues to take steps in the digitalization of manufacturing and introduces Smart Factory and Virtual Reality experience for realtime optimization of production. Read more
How is digitalization shaping the future of production in the wire, cable and pipe industry? Maillefer Smart Factory is opening up a great platform of opportunities for modern manufacturing. Read more
The new three layer crosshead ECH 12/20 DL + skin is designed especially for photovoltaic, train cables and building wire applications. The crosshead is designed to meet the toughest requirements in the variety of material selection in the photovoltaic applications. Read more
A measure of how successful a system operates is to consider the probability of how well each part will run. Seek out a high measure of it when making your future equipment purchases. Read more
Oriental had a demand to produce nylon reinforced tubing for vehicle air brakes. Seizing the opportunity, they acquired a dual layer tandem extrusion line. Shortly after production began, a new demand arrived that only needed some additional head tooling to satisfy. Read more
We wanted more performance from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable, thanks to more cooling, more melt and more speed. Read more