Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
Fiber Optic
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770
com;ol.;nms;n/k;ine;iem;i.n;karMaillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131
om;a.c;rus;efe;ill;/ma;jonMaillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628
om;d.c;dar;tan;s-s;avi;w/d;cho;jzaThe cable is cut precisly to the needed length.
Our Cutter SX 35 is designed for continuous production to cut unarmoured 1 - 35 mm cable. The cutter is automatically controlled at an actual line speed of 5 - 40 m/min. A stand is provided for placing the cutter in line height. The cutter can be run continuously to cut the cable into 675 mm long pieces. Two feeding wheels driven by the main drive are provided. After the cut, an additional short length of the cable is fed through the machine. The operator can easily grasp and pull the cable forward. A free wheel mechanism prevents the end of the cable from being pulled backward and lost. The feeding wheels are separated by the operator by using a reset push-button.
| Cable diameter, max. | 35 mm unarmoured |
| Cable cross section, max. | 120 mm² copper |
| Cable diameter, max. | 15 mm |
Exact values depend on the assembly.
20.9.2018
A Cable Technology Package (CTP) is developed especially for High & Extra High Voltage Subsea Cable (AC) Flexible Vulcanized Joints (FVJ). The CTP was presented at the wire 2018 exhibition. Read more
13.9.2018
Maillefer continues to take steps in the digitalization of manufacturing and introduces Smart Factory and Virtual Reality experience for realtime optimization of production. Read more
6.9.2018
How is digitalization shaping the future of production in the wire, cable and pipe industry? Maillefer Smart Factory is opening up a great platform of opportunities for modern manufacturing. Read more
23.8.2018
The new three layer crosshead ECH 12/20 DL + skin is designed especially for photovoltaic, train cables and building wire applications. The crosshead is designed to meet the toughest requirements in the variety of material selection in the photovoltaic applications. Read more
20.6.2018
A measure of how successful a system operates is to consider the probability of how well each part will run. Seek out a high measure of it when making your future equipment purchases. Read more
13.6.2018
Oriental had a demand to produce nylon reinforced tubing for vehicle air brakes. Seizing the opportunity, they acquired a dual layer tandem extrusion line. Shortly after production began, a new demand arrived that only needed some additional head tooling to satisfy. Read more
6.6.2018
We wanted more performance from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable, thanks to more cooling, more melt and more speed. Read more
18.5.2018
HVDC Optimization for NCC Read more
