Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 678 828 9868
Cell: +1 404 202 9655com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
Our crossheads have compact design and are very easy to handle and quick to assemble.
Our Dual Crosshead ECH 4/6 FS main applications include insulation of telecommunication and data cable conductors as well as electronic and special wires.
A fixed or manual die centring system can be easily selected by just changing one part in the head. Excellent concentricity, that meets most specifications, can be achieved in fixed centring mode. Manual centring mode is only required for some specific applications with extreme tight concentricity tolerances.
The head configuration allows dual layer extrusion of products such as foam/skin, insulation/skin or insulation/striping.
Single layer products with solid or foam insulation can be produced using a dummy outer layer distributor.
The main distributor of this head is conical shaped. A disk type radial distributor is utilised for the outer layer.
The high performance and user friendliness of the head are achieved by combining smart design, close tolerances on all parts and unique geometry for each distributor.
|Cable diameter, max.||6 mm|
|Entry diameter, max.||4 mm|
|No. of temperature controlled zones||2|
Exact values depend on the assembly.
Nexans’ high-voltage cable plant underwent a significant expansion to become the first plant in the USA producing for offshore wind farms. Cable roundness goes a long way to help achieve excellence. Read more
There are several thousand of Maillefer extrusion lines and components currently producing for a large range of applications. Some may be yours. Turn to us to help keep them running at optimum levels. Read more
New features on the PML extrusion lines facilitate medical device assembly downstream and the production of intravenous (IV) tube overall. Read more
Every decade or two, Maillefer reconsiders its portfolio of extruders and undertakes overall redesign. This year, we usher in the first of the MXD series. Read more
The two young entrepreneurs already had extensive experience in the plumbing and heating industry when they first came up with their plan, one that would prove to be quite successful. The passion and commitment brought to the enterprise at the beginning continues today. Read more
MED 3.0 is Maillefer’s web-enabled technical documentation and part identification resource. No more paper binders with outdated references. MED is a sustainable and reactive solution proposed through Maillefer Services. Read more
Much has happened over the past three years. However, one thing hasn’t changed. K 2022 is soon here. Make arrangements now to join us on stand 16 A43! Read more
Microducts are a growing part of the last mile infrastructure. Their bundles, distribution nodes, junction boxes, and connection points compose a no-nonsense network of pathways that are relatively easy to install and maintain. Read more