Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
Our crossheads for rubber cables have compact design and efficient cooling channels. They are very easy to handle and quick to assemble. Advanced technologies for cable type change are available.
Our Single Crosshead NHW 100 is used for a one layer extrusion of LV and MV rubber cables.
The dimensioning of the flow channels ensures exact thickness of each layer. The centring can be adjusted with four centring screws. The gap between the inner layer tip and the die can be longitudinally adjusted. This feature improves the extrusion of various rubber materials regardless of different production speeds. An independently controlled fluid circulation unit is used for temperature control of the crosshead.
In addition to single layer extrusion, the head can be used for striping or skin extrusion. The material flow from an auxiliary extruder is added to the main layer through a striping or skin extrusion distributor. For single layer extrusion, a dummy distributor replaces the distributor for striping or skin extrusion.
The delivery includes a basic crosshead for rubber materials.
|Cable diameter||100 mm|
|Conductor diameter||95 mm|
|No. of temperature controlled zones||2|
|Heating of crosshead body||With oil or water|
Exact values depend on the assembly.
A Cable Technology Package (CTP) is developed especially for High & Extra High Voltage Subsea Cable (AC) Flexible Vulcanized Joints (FVJ). The CTP was presented at the wire 2018 exhibition. Read more
Maillefer continues to take steps in the digitalization of manufacturing and introduces Smart Factory and Virtual Reality experience for realtime optimization of production. Read more
How is digitalization shaping the future of production in the wire, cable and pipe industry? Maillefer Smart Factory is opening up a great platform of opportunities for modern manufacturing. Read more
The new three layer crosshead ECH 12/20 DL + skin is designed especially for photovoltaic, train cables and building wire applications. The crosshead is designed to meet the toughest requirements in the variety of material selection in the photovoltaic applications. Read more
A measure of how successful a system operates is to consider the probability of how well each part will run. Seek out a high measure of it when making your future equipment purchases. Read more
Oriental had a demand to produce nylon reinforced tubing for vehicle air brakes. Seizing the opportunity, they acquired a dual layer tandem extrusion line. Shortly after production began, a new demand arrived that only needed some additional head tooling to satisfy. Read more
We wanted more performance from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable, thanks to more cooling, more melt and more speed. Read more