Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
Fiber Optic
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770
com;ol.;nms;n/k;ine;iem;i.n;karMaillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131
om;a.c;rus;efe;ill;/ma;jonMaillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628
om;d.c;dar;tan;s-s;avi;w/d;cho;jzaOur crossheads have compact design and are very easy to handle and quick to assemble.
Our Triple Crosshead ECH 4/6 PFE main applications include insulation of telecommunication and data cable conductors, coaxial cables and special wires.
A fixed or manual die centring system can be easily selected by just changing one part in the head. Excellent concentricity, that meets most specifications, can be achieved in fixed centring mode. Manual centring mode is only required for some specific applications with extreme tight concentricity tolerances.
The standard head configuration allows triple layer extrusion of products such as skin/foam/skin. With optional dummy distributors, the number of layers can be reduced to two or one for extrusion of products like skin/foam, foam/skin, foam or solid insulation.
Solid insulation with striping can be produced in two layers configuration with an optional striping distributor.
The inner and main distributors of this head are conical shaped. A disk type radial distributor is utilised for the outer layer.
The high performance and user friendliness of the head are achieved by combining smart design, close tolerances on all parts and unique geometry for each distributor.
| Cable diameter, max. | 6 mm |
| Entry diameter, max. | 4 mm |
| Weight | 36 kg |
| No. of temperature controlled zones | 2 |
Exact values depend on the assembly.
20.9.2018
A Cable Technology Package (CTP) is developed especially for High & Extra High Voltage Subsea Cable (AC) Flexible Vulcanized Joints (FVJ). The CTP was presented at the wire 2018 exhibition. Read more
13.9.2018
Maillefer continues to take steps in the digitalization of manufacturing and introduces Smart Factory and Virtual Reality experience for realtime optimization of production. Read more
6.9.2018
How is digitalization shaping the future of production in the wire, cable and pipe industry? Maillefer Smart Factory is opening up a great platform of opportunities for modern manufacturing. Read more
23.8.2018
The new three layer crosshead ECH 12/20 DL + skin is designed especially for photovoltaic, train cables and building wire applications. The crosshead is designed to meet the toughest requirements in the variety of material selection in the photovoltaic applications. Read more
20.6.2018
A measure of how successful a system operates is to consider the probability of how well each part will run. Seek out a high measure of it when making your future equipment purchases. Read more
13.6.2018
Oriental had a demand to produce nylon reinforced tubing for vehicle air brakes. Seizing the opportunity, they acquired a dual layer tandem extrusion line. Shortly after production began, a new demand arrived that only needed some additional head tooling to satisfy. Read more
6.6.2018
We wanted more performance from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable, thanks to more cooling, more melt and more speed. Read more
18.5.2018
HVDC Optimization for NCC Read more
