Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
Our Water Cooled Extruder NXW 100 ensures a high productivity and a reliable operation in long runs. An accurate temperature control and screw design ensure a stable and high quality output.
The extruder is based on the well-known and proven extrusion technology of Maillefer. A unique screw and barrel combination, perfected through theoretical studies, computer simulations and know-how accumulated over decades, guarantees a high, stable and linear output with a low melt temperature.
It is made for processing thermally sensitive polymers and elastomers at low temperatures. Typical materials are semiconductive compounds for power cables.
The design of the extruder is compact with all main components on a single base frame. The compact extruder takes a minimum factory space. High quality proven components give a long lifetime with a minimum need for maintenance.
The temperature is controlled precisely with efficient heating and cooling. The temperature is measured close to the inside surface of the barrel. This allows a fast response to any change in the process conditions.
|Screw diameter||100 mm|
|Screw operation length||20 x D|
|Screw speed, max.||25 rpm|
Exact values depend on the assembly.
A Cable Technology Package (CTP) is developed especially for High & Extra High Voltage Subsea Cable (AC) Flexible Vulcanized Joints (FVJ). The CTP was presented at the wire 2018 exhibition. Read more
Maillefer continues to take steps in the digitalization of manufacturing and introduces Smart Factory and Virtual Reality experience for realtime optimization of production. Read more
How is digitalization shaping the future of production in the wire, cable and pipe industry? Maillefer Smart Factory is opening up a great platform of opportunities for modern manufacturing. Read more
The new three layer crosshead ECH 12/20 DL + skin is designed especially for photovoltaic, train cables and building wire applications. The crosshead is designed to meet the toughest requirements in the variety of material selection in the photovoltaic applications. Read more
A measure of how successful a system operates is to consider the probability of how well each part will run. Seek out a high measure of it when making your future equipment purchases. Read more
Oriental had a demand to produce nylon reinforced tubing for vehicle air brakes. Seizing the opportunity, they acquired a dual layer tandem extrusion line. Shortly after production began, a new demand arrived that only needed some additional head tooling to satisfy. Read more
We wanted more performance from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable, thanks to more cooling, more melt and more speed. Read more