Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 678 828 9868
Cell: +1 404 202 9655com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
Our Water Cooled Extruder NXW 175 ensures a high productivity and a reliable operation in long runs. An accurate temperature control and screw design ensure a stable and high quality output.
The extruder is based on the well-known and proven extrusion technology of Maillefer. A unique screw and barrel combination, perfected through theoretical studies, computer simulations and know-how accumulated over decades, guarantees a high, stable and linear output with a low melt temperature.
It is made for processing thermally sensitive polymers and elastomers at low temperatures. Typical materials are semiconductive compounds for power cables.
The design of the extruder is compact with all main components on a single base frame. The compact extruder takes a minimum factory space. High quality proven components give a long lifetime with a minimum need for maintenance.
The temperature is controlled precisely with efficient heating and cooling. The temperature is measured close to the inside surface of the barrel. This allows a fast response to any change in the process conditions.
|Screw diameter||175 mm|
|Screw operation length||24 x D|
|Screw speed, max.||30 rpm|
Exact values depend on the assembly.
Since two decades, Maillefer has been providing production systems for manufacturing multi-layer composite pipe with diameters ranging from 14 to 32 mm and from 16 to 63 mm. Today, our two model lines, the PCL32 and PCL63 that cover the two size ranges have evolved much. We are closer to 60 m/min, which first presented serious challenges to polymer and aluminum tape suppliers. Read more
What is the Bluebox, and why blue in particular? Industry 4.0 has passed through here and with it a fresh way of looking at and consolidating information coming from your factory floor. Read more
Two X-ray gauges are used in CV lines to measure thicknesses, concentricity & diameter during production of MV, HV and EHV cables. Now, the second gauge at the cold end (after end seal) is orientable to give a synchronized visual of measurements taken by the 1st gauge at the hot end. Read more
Wishing You Happy Holidays and a Successful New Year 2020! Read more
The CSA 32 combines the cutting, measuring, conveying and collection of extruded tube in one swift process. The number and lengths of collection bins are customized according to product requirements. The holding capacity doubles by opting for bins mounted on both sides. Read more
A perfect crosshead solution for single and dual layer extrusion of LV and MV rubber cables. The conical design allows improved contact between parts with improved centering, sealing and heat transmission. Conical parts are also easier to assemble and dismantle. Read more
Maillefer has a coiler or reeler model for your specific pipe & tube application. While they compose a familiar item in our typical extrusion line portfolio, they are also quite popular as individual components for upgrades of existing lines. Every model is fully automated, dual position, stand-alone, user-friendly and built with safety in mind. Read more